← Back to Limestone Run

Campus data

This independent recreation covers outdoor Queen’s Main Campus and its Kingston surroundings. Locations use local metre coordinates aligned to the same map origin as the earlier Godot build.

Terrain and roofs

The 1 m terrain grid combines the federal HRDEM terrain mosaic with consistent classified ground returns from the Eastern Ontario Part 1 (2021) flight. Building returns supply representative roof heights and, where both slopes fit the survey, a gabled roof. The dataset records 65 fitted gables, 591 footprint caps at a survey-derived height, and 88 at a source-estimated height. Five footprints have separate hand-modeled roof assemblies. These include the connected Grant and Kingston halls.

The 2009 LEAP survey was used as a historical terrain check through 16,290 City contour label locations. The median absolute difference was about 0.37 m before any correction for historical terrain change or vertical datum. Newer measurements drive the playable surface. City 2009 raster endpoints did not serve public exports during collection. The Ontario index does not place the 2024 Cataraqui survey over Main Campus.

Campus geometry

Contains information licensed under the Open Data Licence – City of Kingston. City data includes building footprints, mapped structures, and individual trees. Tree canopy shapes and heights are estimates. Contains information licensed under the Open Government Licence – Canada.

© OpenStreetMap contributors. Roads, footpaths, steps, building infill, entrances, barriers, and some street furniture are adapted from OpenStreetMap under the Open Database Licence 1.0. The machine-readable map and the building tiles it indexes are available in this build.

Streets, entrances and outdoor links

The city’s pavement polygons locate asphalt, sidewalks and paths. OpenStreetMap covers additional walkways and mapped planting beds. Curb and pavement heights are estimates draped over the terrain. The central campus forecourts and the brick crossing bands at Union follow the spring 2019 orthophoto and Queen’s existing-conditions photographs. The orthophoto also shows concrete medians on either side of the crossing. Their outlines follow the matching gaps in the city road polygons. Planting detail and unmeasured door and stair dimensions are approximate.

The Goodwin–Walter Light building link has a clear ground-level passage and the Lower University footbridge uses its mapped alignment. The campus reflects the removal of the Fleming second-storey bridge documented by Queen’s in 2026. The grounds have mixed survey dates, and active construction and landscaping changes are only partially reflected.

Tindall Field

The 2019 City orthophoto established the curved track, field orientation, concrete seating edge and access structures. It shows the 2019 resurfacing work. Athletics photos and its later access plan establish the finished red, three-lane surface, lettering, turf, field furniture and open northern entrances. Painted multisport markings and small fixture dimensions are approximate.

Architectural references

Uses original modeled geometry informed by the Queen’s campus map, the Campus Master Plan, the building directory and the Heritage Study. Exterior details are hand-authored at selected landmarks. Most other façades use estimated floor counts and reusable architectural parts. Door and window details, interiors, and changes since the survey are incomplete. The official Concept3D models and the Ontario Hall terrestrial point cloud were not available as authorized public downloads.

Surface scans

Photographic material scans are licensed CC0 and locally served as WebP. The scans are generic stone, brick, asphalt, concrete, slate, grass and track surfaces. Campus photographs are used as modeling references.

Stone Wall 05 · Old Stone Wall 02 · Brick Wall 001 · Concrete Wall 008 · Concrete Floor 02 · Asphalt Floor · Red Slate Roof Tiles 01 · Grass Ground · Rubberized Track · Brick Floor 02

Software and type

The Preetham sky, cascaded shadow maps and post-processing passes use the Three.js r183 addons under the MIT licence.

Three.js licence · Rapier licence · Barlow Condensed font licence · IBM Plex Mono font licence